SON ADOPT IEC/CISPR STANDARD FOR NIGERIA

methods of measurement

2012

methods of measurement for the protection of offboard receivers

2012

methods of measurement for the protection of offboard receivers

Part 1:2012

household appliances, electric tools and similar

apparatus Part 1: Emission

Part 2:2012

household appliances, electric tools and similar

apparatus Part 2: Immunity – Product family standard

15:2012

disturbance characteristics of electrical lighting and

similar equipment

Part 1-1:2012

measuring apparatus and methods Part 1-1: Radio

disturbance and immunity measuring apparatus -Measuring apparatus

Part 1-2:2012

measuring apparatus and methods Part 1-2: Radio

disturbance and immunity measuring apparatus -Ancillary equipment – Conducted disturbances

Part 1-3:2012

measuring apparatus and methods Part 1-3: Radio

disturbance and immunity measuring apparatus -Ancillary equipment – Disturbance power

Part 1-4:2012

measuring apparatus and methods Part 1-4: Radio

disturbance and immunity measuring apparatus -Antennas and test sites for radiated disturbance

measurements

Part 1-5:2012

apparatus and methods Part 1-5: Radio disturbance and

immunity measuring apparatus – Antenna calibration test

sites for 30 MHz to 1 000 MHz

Part 2-1:2012

apparatus and methods Part 2-1: Methods of measurement

of disturbances and immunity – Conducted disturbance

measurement

Part 2-2:2012

apparatus and methods Part 2-2: Methods of measurement

of disturbances and immunity – Measurement of disturbance

power

Part 2-3:2012

apparatus and methods Part 2-3: Methods of measurement

of disturbances and immunity – Radiated disturbance

measurements

Part 2-4:2012

apparatus and methods Part 2-4: Methods of measurement

of disturbances and immunity – Immunity measurements

Part 4-1:2012

apparatus and methods Part 4-1: Uncertainties, statistics and

limit modelling – Uncertainties in standardized EMC tests

Part 4-2:2012

apparatus and methods Part 4-2: Uncertainties, statistics and

limit modelling – Uncertainty in EMC measurements

Part 4-3:2012

apparatus and methods Part 4-3: Uncertainties, statistics and

limit modelling – Statistical considerations in the

determination of EMC compliance of mass- produced

products

Part 4-4:2012

apparatus and methods Part 4-4: Uncertainties, statistics and

limit modelling – Statistics of complaints and a model for the

calculation of limits for the protection of radio services

Part 1:2012

and high-voltage equipment Part 1: Description of

phenomena

Part 2:2012

and high-voltage equipment Part 2: Methods of

measurement and procedure for determining limits

Part 3:2012

and high-voltage equipment Part 3: Code of practice for

minimizing the generation of radio noise

20:2012

equipment – Immunity characteristics – Limits and methods

of measurement

22:2012

characteristics – Limits and methods of measurement

24:2012

characteristics – Limits and methods of measurement

25:2012

disturbance characteristics – Limits and methods of

measurement for the protection of on-board receivers

Part 1-2:2012

electrical and electronic systems including equipment with

regard to electromagnetic phenomena

Part 1-3

and systems

Part 1-52012

Part 2-2:2012

– Compatibility levels for low- frequency conducted

disturbances and signalling in public low-voltage power

supply systems

Part 2-4:2012

– Compatibility levels in industrial plants for low-frequency

conducted disturbances

Part 2-5:2012

Section 5: Classification of electromagnetic environments -Basic EMC publication

Part 2-7:2012

Section 7: Low frequency magnetic fields in various

environments

Part 2-10:2012

Environment – Description of HEMP environment -Conducted disturbance

Part 2-11:2012

Environment – Classification of HEMP environments

Part 2-12:2012

Environment – Compatibility levels for low- frequency

conducted disturbances and signalling in public medium voltage power supply systems

Part 3-2:2012

current <= 16 A per phase)

Part 3-4:2012

power supply systems for equipment with rated current

greater than 16 A

Part 3-5:2012

power supply systems for equipment with rated current

greater than 75 A

Part 3-11:2012

flicker in public low-voltage supply systems – Equipment

with rated current <= 75 A and subject to conditional

connection

Part 3-12:2012

connected to public low-voltage systems with input current

>16 A and <=75 A per phase

Part 4-1:2012

measurement techniques – Overview of IEC 61000-4 series

Part 4-2:2012

measurement techniques – Electrostatic discharge immunity

test

Part 4-3:2012

measurement techniques – Radiated, radio-frequency,

electromagnetic field immunity test

Part 4-4:2012

measurement techniques – Electrical fast transient/burst

immunity test

Part 4-5:2012

measurement techniques – Surge immunity test

Part 4-6:2012

measurement techniques – Immunity to conducted

disturbances, induced by radio-frequency fields

Part 4-7:2012

and measurement techniques – General guide on

harmonics and inter harmonics measurements and

instrumentation, for power supply systems and

equipment connected thereto

Part 4-8:2012

and measurement techniques – Power frequency

magnetic field immunity test

Part 4-9:2012

and measurement techniques – Pulse magnetic field

immunity test

Part 4-10:2012

and measurement techniques – Damped oscillatory

magnetic field immunity test

Part 4-11:2012

and measurement techniques – Voltage dips, short

interruptions and voltage variations immunity tests

Part 4-12:2012

and measurement techniques – Ring wave immunity

test

Part 4-13:2012

and measurement techniques – Harmonics and inter

harmonics including mains signalling at a.c. power

port, low frequency immunity tests

Part 4-14:2012

and measurement techniques – Voltage fluctuation

immunity test for equipment with input current not

exceeding 16 A per phase

Part 4-16:2012

and measurement techniques – Test for immunity to

conducted, common mode disturbances in the

frequency range 0 Hz to 150 kHz

Part 4-17:2012

and measurement techniques – Ripple on d.c. input

power port immunity test

Part 4-20:2012

and measurement techniques – Emission and

immunity testing in transverse electromagnetic (TEM)

waveguides

Part 4-24:2012

and measurement techniques Section 24: Test

methods for protective devices for HEMP conducted

disturbance – Basic EMC publication

Part 4-25:2012

and measurement techniques – HEMP immunity test

methods for equipment and systems

Part 4-27:2012

and measurement techniques – Unbalance, immunity

test for equipment with input current not exceeding 16

A per phase

Part 4-28:2012

and measurement techniques – Variation of power

frequency, immunity test for equipment with input

current not exceeding 16A per phase

Part 4-29:2012

and measurement techniques – Voltage dips, short

interruptions and voltage variations on d.c. input

power port immunity tests

Part 4-30:2012

and measurement techniques – Power quality

measurement methods

Part 5-1:2012

Installation and mitigation guidelines Section 1:

General considerations – Basic EMC publication

Part 5-2:2012

Installation and mitigation guidelines Section 2:

Earthing and cabling

Part 5-3:2012

Installation and mitigation guidelines – HEMP

protection concepts

Part 5-4:2012

Installation and mitigation guidelines Section 4:

Immunity to HEMP – Specifications for protective

devices against HEMP radiated disturbance – Basic

EMC publication

Part 5-5:2012

Installation and mitigation guidelines Section 5:

Specification of protective devices for HEMP

conducted disturbance – Basic EMC publication

Part 5-6:2012

Installation and mitigation guidelines – Mitigation of

external EM influences

Part 5-7:2012

Installation and mitigation guidelines – Degrees of

protection provided by enclosures against

electromagnetic disturbances (EM code)

Part 6-1:2012

standards – Immunity for residential, commercial and

light-industrial environments

Part 6-2:2012

standards – Immunity for industrial environment

Part 6-4:2012

standards – Emission standard for industrial

environment

Part 6-5:2012

standards – Immunity for power station and substation

environments

Part 6-6:2012

standards – HEMP immunity for indoor equipment

Part 1

laboratory use – EMC requirements Part 1: General

Requirements

Part 2-1:2012

use – EMC requirements Part 2-1: Particular requirements -Test configurations, operational conditions and performance

criteria for sensitive test and measurement equipment for

EMC unprotected applications

:2012

and body-mounted wireless communication devices – Human

models, instrumentation, and procedures

Part 1: Procedure to determine the specific absorption rate

(SAR) for hand-held devices used in close proximity to the

ear (frequency range of 300MHz to 3 GHz)

:2012

wireless communication devices – Human models, instrumentation, and

procedures –

Part 2: Procedure to determine the specific absorption rate (SAR) for wireless

communication devices used in close proximity to the human body (frequency

range of 30 MHz to 6 GHz)

60335-1:2012

– Part 1: General requirements

60335-2-3

Safety –

Part 2-3:

Particular requirements for electric irons

Part 2-3: Particular requirements for electric irons

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-3: Règles particulières pourles fers à repasser électriques

Part 2-3: Particular requirements for electric irons

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-3: Règles particulières pourles fers à repasser électriques

60335-2-5:2012

Part 2-5: Particular requirements for dishwashers

60335-2-6:2012

Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and

similar appliances

60335-2-7:2012

Part 2-7: Particular requirements for washing machines

60335-2-8:2012

Part 2-8:Particular requirements for shavers,

hair clippers and similar appliances

60335-2-9:2012

Part 2-9: Particular requirements for grills, toasters and similar portable cooking

appliances

60335-2-10:2012

Part 2-10: Particular requirements for floor treatment machines and wet

scrubbing machines

60335-2-11:2012

Part 2-11: Particular requirements for tumble dryers

60335-2-12:2012

Part 2-12: Particular requirements for warming plates and similar appliances

60335-2-13:2012

Part 2-13: Particular requirements for deep fat fryers, frying pans and similar

Appliances

60335-2-14:2012

Part 2-14: Particular requirements for kitchen machines

60335-2-15:2012

Part 2-15: Particular requirements for appliances for heating liquids

60335-2-21:2012

Part 2-21: Particular requirements for storage water heaters

60335-2-23:2012

Part 2-23: Particular requirements for appliances for skin or hair care

60335-2-24:2012

Part 2-24: Particular requirements for refrigerating appliances, ice -cream

appliances and ice -makers

60335-2-26:2012

Part 2-26: Particular requirements for clocks

60335-2-27:2012

Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet

and infrared radiation

60335-2-28:2012

Part 2-28: Particular requirements for sewing machines

60335-2-29:2012

Part 2-29: Particular requirements for battery chargers

60335-2-31:2012

Part 2-31: Particular requirements for range hoods

60335-2-32:2012

Part 2-32: Particular requirements for massage appliances

60335-2-34:2012

Part 2-34: Particular requirements for motor-compressors

60335-2-40:2012

Part 2-40: Particular requirements for electrical heat pumps,

air conditioners and dehumidifiers

60335-2-41:2012

Part 2-41: Particular requirements for pumps

60335-2-45:2012

Part 2-45: Particular requirements for portable heating tools and similar

appliances

60335-2-54:2012

Part 2-54: Particular requirements for surface-cleaning appliances for household

use employing liquids or steam

60335-2-59:2012

Part 2-59: Particular requirements for insect killers

60335-2-73:2012

Part 2-73: Particular requirements for fixed immersion heaters

60335-2-80:2012

Part 2-80: Particular requirements for fans